Land creation, ground reinforcement connection material
Technique ton
Technique ton
The technique ton from the 1980s in about 40 nembun
It is Geotextiles (Engineering works sheet) used in all the countries of the world.
■Features:
1. I display fiber of the thickness 10 times as large as general Geotextiles at random and I show uniform strength in all directions and break up stress effectively
2. A soil particle is hard to stay in a seat thinly if with a thickness of 1mm or less and maintains stable permeability in soil
3. It is thin and is chewy and can easily cut it, and the roll diameter is lightweight small, too, and construction characteristics are good
4. The material is aciduric without being hydrolyzed 100% of polyp mouth pyrene and is superior in alkalinity-resistant, and the durability is high in the under the ground
2. A soil particle is hard to stay in a seat thinly if with a thickness of 1mm or less and maintains stable permeability in soil
3. It is thin and is chewy and can easily cut it, and the roll diameter is lightweight small, too, and construction characteristics are good
4. The material is aciduric without being hydrolyzed 100% of polyp mouth pyrene and is superior in alkalinity-resistant, and the durability is high in the under the ground
■A use:
1. The soft ground reinforcement
2. Temporary road roadbed reinforcement
3. I roll it and assist you
2. Temporary road roadbed reinforcement
3. I roll it and assist you
4. Earth layer separation
5. Drainage filter out of the soil
6. Block pavement spread sand separation
■Specifications: -Product catalogue -
Technique ton
|
Article number
|
Thickness
(mm)
|
Mass
(g/ heihometoru)
|
Tensile strength (kN/m) |
Growth rate
(%)
|
Water permeance coefficient
(cm/s)
|
Roll standard | |||||
| Length | The side | Width (m) | Winding long (m) | Diameter (cm) | Weight (kg) | ||||||
| T3151 | 0.20 | 50 | 0.6 | 0.6 | 60 | 3.0 X 10-2 | 2.0 | 50 | 13 | 5 | |
| T3251 | 0.30 | 80 | 3.0 | 3.0 | 60 | 2.0 X 10-2 | 2.0 | 50 | 15 | 8 | |
| T3401 | 0.47 | 135 | 4.6 | 4.6 | 60 | 1.0 X 10-2 | 2.0 | 50 | 18 | 14 | |
| 4.7 | 50 | 18 | 32 | ||||||||
| T3601 | 0.53 | 200 | 10.8 | 10.8 | 60 | 2.4 X 10-3 | 4.7 | 50 | 19 | 47 | |
Reference level by JIS L 1096
| Article number | Tensile strength (N) |
Growth rate
(%)
|
|
| Length | The side | ||
| T3151 | 180 | 180 | 60 |
| T3251 | 350 | 350 | 60 |
| T3401 | 570 | 570 | 60 |
| T3601 | 985 | 985 | 60 |
